Frizzlife LP365 currently supports the Frizzlife app for setup and remote control, and the owner’s manual also states that LP365 supports connection to the Smart Life app. After pairing, users can review available water information, receive alerts, check device status, and manage the shutoff valve remotely.
The standard LP365 displays household flow information plus pipeline temperature. LP365-P displays household flow information plus pipeline pressure. Both versions share the same core role as whole-home smart water monitors with automatic shutoff support.
For current product information, visit:
https://www.frizzlife.com/products/lp365
For the official LP365/LP365-P operation and pairing resources, visit:
https://www.frizzlife.com/pages/installation-video-new
What App Does LP365 Use: Frizzlife App or Smart Life?
The current LP365 owner’s manual instructs users to download the Frizzlife app and also states that the device supports connection to Smart Life. In other words, LP365 is not limited to a single app name in the current documentation.
For a new setup, follow the latest Frizzlife operation or Quick Pair Guide first. App screens, button names, and pairing flow can change with software and firmware updates, so the current guide should take priority over older screenshots or third-party instructions.
LP365 is the installed water-monitoring and shutoff device. The app is the remote interface for supported monitoring, alerts, settings, and valve control.
What Can You Do in the LP365 App?
The LP365 app experience centers on four practical tasks:
• Review water information
• Receive alerts
• Check device and valve status
• Control the valve remotely
The exact information shown depends on the model.
LP365 app data
The standard LP365 is the Flow + Temperature version. Its connected information includes household water flow and pipeline temperature data.
LP365-P app data
LP365-P is the Flow + Pressure version. It shows household water flow and pipeline pressure rather than pipeline temperature.
The pressure-versus-temperature difference is a model difference, not a setting that can simply be switched in the app.
How to Set Up the LP365 App
The safest setup process is to use the official LP365/LP365-P Quick Pair Guide because pairing steps can change with app and firmware updates.
At a high level, the process follows these stages.
1. Complete the physical installation first
LP365 should be correctly installed on the intended water supply line before you rely on app data.
Confirm that:
• The plumbing connections are secure.
• Normal water service has been restored.
• The device has power.
• The display and valve respond normally.
• Wi-Fi coverage is reliable at the installation location.
Do not use app pairing as a substitute for checking the physical installation.
2. Install the current supported app
Use the app referenced by the current Frizzlife documentation. The latest owner’s manual points users to the Frizzlife app and also notes Smart Life support. Avoid unofficial apps with similar names.
Sign in or create the required account according to the current app flow.
3. Keep LP365 plugged in for pairing
The current owner’s manual states that LP365 must be plugged in to connect to the app. Follow the LP365/LP365-P Quick Pair Guide for the current pairing method, QR-code flow, and indicator behavior.
Do not assume a generic Tuya or smart-device pairing procedure is identical to LP365. Use the current Frizzlife device-specific guide as the source of truth.
4. Connect the device to the home network
Pair LP365 using the supported network configuration shown in the current instructions.
If pairing repeatedly fails, check signal strength at the device location before assuming there is a hardware problem. Utility rooms, basements, garages, and meter areas can have weak Wi-Fi even when the rest of the house has good coverage.
5. Verify live device information
After pairing, open a household fixture and confirm that the app reports water activity.
The displayed secondary measurement should match the model:
• LP365: pipeline temperature
• LP365-P: pipeline pressure
If the app shows no expected water activity, first confirm the device itself is operating and installed correctly.
6. Verify remote valve control
Test the valve function carefully through the supported controls.
Make sure you can restore normal water service after the test. Do not perform repeated shutoff tests during a time when household appliances or fixtures require continuous water.
How LP365 Alerts Work
LP365 is designed to notify users when the system identifies potential leaks or unusual water activity according to its protection settings.
The current Frizzlife product content references app notifications and other notification options depending on settings and service configuration.
Because notification channels, app versions, and service terms can change, users should check the current Smart Life settings and Frizzlife documentation for the exact alerts available to their account.
The important point is that an alert is only useful if:
• Notifications are enabled on the phone.
• The LP365 device is connected.
• Protection settings are appropriate for normal household use.
• The user understands what triggered the alert.
Do not treat every alert as proof of a plumbing failure. High-flow normal use can also create unusual water patterns.
Automatic Shutoff and the App
LP365 can automatically close the connected valve when abnormal water conditions meet configured protection rules.
The app adds another layer of control by allowing the user to check the system and manage valve status remotely.
These are separate concepts:
Automatic shutoff
The device responds based on the configured protection logic.
Remote shutoff
The user chooses to close the valve through the connected app.
Manual local control
The user operates the valve from the device controls.
Having more than one control method can be helpful when troubleshooting or checking the system from different locations.
Explore Frizzlife Smart Water Monitor Options
Choose a whole-home smart water monitoring setup based on the type of monitoring and leak protection you need.
Frizzlife LP365
Smart water monitor with automatic shutoff, app monitoring, and remote valve control.
View LP365
Frizzlife LPG365-P-3S
Pressure and flow monitoring system paired with three leak sensors for additional whole-home leak detection.
View LPG365-P-3S
Frizzlife LPG365-3S
Temperature and flow monitoring system paired with three leak sensors for additional whole-home leak detection.
View LPG365-3SWhat to Do When You Receive an LP365 Alert
An alert should lead to a quick check, not immediate guesswork.
1. Check the current flow reading
If water is actively moving through the system, consider whether a fixture, appliance, irrigation zone, or other legitimate water use explains it.
2. Check whether anyone is using water
Ask whether someone is showering, filling a tub, using a washing machine, running irrigation, or performing another high-use task.
3. Look for visible signs of a leak
Check high-risk areas such as:
• Water heaters
• Washing machines
• Toilets
• Under-sink cabinets
• Refrigerator water lines
• Dishwashers
• Mechanical rooms
• Exposed plumbing
4. Review valve status
If LP365 has already closed the valve, do not reopen it automatically until you understand why the system responded.
5. Investigate repeated abnormal-flow alerts
Frizzlife’s FAQ includes a leak-test process for situations where water flow appears when all normal water-using devices are off.
Repeated unexplained flow can indicate a small leak that deserves physical inspection.
Using Protection Settings Without Creating Too Many False Alarms
A whole-home monitor has to learn or be configured around real household water use.
Homes with large tubs, irrigation, long showers, multiple simultaneous fixtures, or high-flow appliances can create legitimate water patterns that look unusual.
Frizzlife support guidance includes protection-setting tools for managing high-use periods.
The goal should be to tune protection intelligently, not simply switch it off whenever an alert is inconvenient.
If the valve repeatedly closes during known normal use:
• Confirm the event is actually normal.
• Review the flow conditions that triggered it.
• Check the current protection settings.
• Use the official guidance for allowed high-use periods when appropriate.
• Contact support if behavior is inconsistent or difficult to explain.
Remote Monitoring While Traveling
One of the most useful LP365 app use cases is checking the home while away.
Before relying on the app for a trip, verify the system while you are still home.
Test that:
• The device remains online.
• The app can display status from outside the home network.
• Valve control works as expected.
• Notifications are enabled.
• Protection settings are appropriate for an unoccupied property.
• Another trusted person knows how to access the property if physical inspection becomes necessary.
Remote monitoring can provide valuable awareness, but it does not eliminate the need for someone to inspect the home if the system reports a serious problem.
What Happens If Wi-Fi or Wall Power Is Unavailable?
Remote app functions depend on network connectivity, but the current owner’s manual gives an important distinction for power loss: LP365 must be plugged in to connect to the app, yet when unplugged it can run on its internal battery, continue monitoring water use, and still shut off the valve automatically. The app is used for remote control.
A network outage can still interrupt remote visibility, cloud-delivered alerts, and remote commands. For users who depend on remote monitoring while traveling, reliable Wi-Fi and normal wall power at the installation location remain important.
Does the LP365 App Require a Subscription?
The current public LP365 product information does not clearly establish one universal fee structure for every possible notification channel or connected service.
Do not assume that every app, SMS, phone, or other notification feature is permanently free simply because basic app access is available.
Check the current Smart Life app terms, LP365 documentation, and Frizzlife support information for the exact service options available when you set up the device.
This is especially important if a specific notification channel is a major reason for purchasing LP365.
LP365 App Troubleshooting Checklist
If the app is not working as expected, check the system in this order.
Device status
• Is LP365 powered?
• Does the local display work?
• Can the valve be controlled locally?
• Does the device show flow when water is used?
Network
• Is Wi-Fi available at the installation location?
• Has the router or network name changed?
• Is the signal weaker than it was during setup?
• Did the device recently go offline after a power or network interruption?
App
• Is Smart Life updated?
• Are you signed into the correct account?
• Is LP365 still present in the account?
• Are phone notification permissions enabled?
• Does the app show the device as online?
Pairing
• Use the current LP365/LP365-P Quick Pair Guide.
• Do not rely on old screenshots if the app layout has changed.
• Recheck network coverage before repeatedly resetting the device.
Protection behavior
• Review what water event triggered the alert or shutoff.
• Confirm whether high-flow normal use was occurring.
• Run the official leak-test process if unexplained flow remains when all fixtures are off.
When the cause is unclear, contact Frizzlife support rather than repeatedly changing settings without understanding the underlying event.
LP365 App Privacy and Account Access
Any connected home device involves account and network access.
Use a strong password for the Smart Life account and keep the phone’s operating system and app updated. Only share account access with people who genuinely need control of the household water system.
If multiple household members need access, use the current supported account-sharing method rather than casually sharing a primary password when possible.
Because app features and permissions can change, review the current privacy and account settings in the live app.
Frequently Asked Questions
What app does Frizzlife LP365 use?
The current owner’s manual instructs users to download the Frizzlife app and also states that LP365 supports Smart Life. Follow the latest Frizzlife Quick Pair Guide for the current setup path.
Can I shut off the water remotely with LP365?
Yes. LP365 supports remote valve management through the connected app when the device is online and properly configured.
What information does the LP365 app show?
LP365 provides household flow information plus pipeline temperature. LP365-P provides household flow information plus pipeline pressure.
Can LP365 send leak alerts to my phone?
LP365 supports app-based alerts for potential leaks or unusual water activity. Exact notification channels depend on the current app, settings, and service configuration.
Why is my LP365 showing alerts during normal water use?
High-flow appliances, long water-use events, or household usage patterns can trigger protection logic if settings do not match normal use. Confirm the activity first, then review the current protection settings.
Can I use LP365 without Wi-Fi?
Some local device functions can still exist independently of remote app access, but connected monitoring and remote control depend on network connectivity. Check the current operation guide for exact offline behavior.
Does LP365 work with Home Assistant?
The official LP365 product information identifies the Tuya Smart Life app. Do not assume Home Assistant or other third-party platform compatibility unless current Frizzlife documentation explicitly confirms it.
The Bottom Line
The LP365 app is most useful when it supports a correctly installed and correctly configured water-monitoring system.
Use Smart Life to review available water data, receive alerts, check valve status, and manage the shutoff valve remotely. Keep the model difference clear: LP365 adds pipeline temperature, while LP365-P adds pipeline pressure.
For the best setup experience, follow the current Frizzlife Quick Pair Guide, verify reliable Wi-Fi at the installation location, test remote valve control before depending on it, and tune protection settings around normal household water use.
Official LP365 product page:
https://www.frizzlife.com/products/lp365
Official LP365/LP365-P pairing resources: